DuroCast®
Sustainable material with the highest design standards
DuroCast® Plus – a classic bath material that stands the test of time
DuroCast® Plus is made from a single material. This means that the ceramic material, which is completely white through and through, appears particularly homogeneous. However, should signs of wear ever appear on this durable material, they can be easily removed without leaving any residue. The matt, velvety surface is pleasantly warm and soft to the touch.
Series with DuroCast® Plus
The special feel and homogeneous appearance of DuroCast® Plus surfaces are shown off to their best advantage in bathtubs. The tubs in the Cape Cod and Luv series, as well as the free-standing bathtubs and pre-wall versions of the Aurena and Studio F. A. Porsche Collection, are each made of DuroCast® Plus – for an especially pleasant bathing experience.
DuroCast® Smooth – versatile variety
Thanks to its gel coat, DuroCast® Smooth is characterized by a robust, easy-to-clean and UV-resistant surface that impresses with excellent material properties as well as a wide range of surface options. The gel coat allows for a variety of color schemes and extraordinary structures – with a choice of glossy or matte finish.
Series with DuroCast® Smooth
The low weight of DuroCast® Smooth is particularly useful for the built-in bathtub of the Aurena series.
DuroCast® UltraResist – extremely resilient
DuroCast® UltraResist receives a flawless finish thanks to two layers of lacquer. These also give the material properties that are particularly advantageous in the bathroom: with its non-porous surface, DuroCast® UltraResist is easy to clean and particularly resistant to scratches and dirt. The extremely durable material even exceeds the requirements for impact resistance.
Series with DuroCast® UltraResist
The special resilience of DuroCast® UltraResist is demonstrated to great effect in the Bento Starck Box series. Even the free-standing bathtubs in the D-Neo series are made of this material.
The sustainable manufacturing process of DuroCast®
DuroCast® saves CO₂ in contrast to conventional ceramics. This is because of the low drying temperature, which differs from the energy-intensive ceramic production process.
With DuroCast®, the raw materials used are automatically mixed and prepared for the casting process. This results in a homogeneous casting compound that is poured into appropriate molds. In the case of DuroCast® Plus, UltraResist and Smooth, the material is composed primarily of natural minerals and resin as a binder. DuroCast® Nature, meanwhile, consists of polyurethane mixed with marble powder.
The casting process is followed by two drying stages: in the first step, the liquid casting compound hardens in the mold in a heating chamber. In the second step, the product is removed from the mold and placed in a separate warehouse in the kiln, where it is tempered at temperatures of up to 80°C to relieve tension. During this phase, the material is finally hardened. Once they have cooled down, the finished products receive the crucial finishing touch in the polishing cabin.