Close-up of a shower tray from Duravit's Stonetto series

Water consumption while showering

How many liters does a shower use?

Showering is part of general hygiene. Not everyone realizes just how much water is actually used when showering. Even a few minutes more or less can significantly affect water usage. Here, you’ll learn how many liters you use when showering, how you can measure your own water usage, and how you can reduce it.

Key points at a glance:

  • Water consumption while showering depends primarily on the duration of the shower, the flow rate of the showerhead, and your own showering habits.
  • Showerheads typically have a flow rate of 12–15 liters. This can often be adjusted manually.
  • It's very easy to calculate your personal shower water usage: shower duration × shower head flow rate = water usage per shower

3 factors that affect water consumption while showering

The amount of water used during a shower depends primarily on three factors: the duration of the shower, the flow rate of the shower head, and personal showering habits.

A close-up of water hitting a black shower tray

1. Shower duration

Image of a hand shower with a click function

2. Flow rate

A person showering under a showerhead

3. Showering habits

By the way: While water temperature doesn't affect the amount of water used, it does make a difference—for example, when it comes to your wallet. Learn more here about how you can save energy in the bathroom.

How much water do you use when you take a shower?

Showerheads typically use 12 or 15 liters of water per minute. At a flow rate of, say, 12 liters per minute, a five-minute shower uses about 60 liters of water. Naturally, the longer you shower, the more water you use.

The following table shows how much different flow rates and shower durations can affect water consumption:

Shower Duration/Water Flow Rate 6 L/min 9 L/min 12 l/min 15 l/min
5 minutes 30 liters 45 liters 60 liters 75 liters
8 minutes 48 liters 72 liters 96 liters 120 liters
10 minutes 60 liters 90 liters 120 liters 150 liters
15 minutes 90 liters 135 liters 180 liters 225 liters

The amount of water used during a shower can therefore vary greatly depending on your personal shower routine. The key factors are how long you shower and how many liters of water flow through the shower head per minute.

Tip: On some shower heads, you can adjust the water flow using a button on the shower head. This is also the case with the MinusFlow feature on Duravit shower heads. This makes it easy to reduce your water usage while showering.

How can you calculate your personal water consumption while showering?

Image of a shower system by Duravit

1. Determine the flow rate of the showerhead

To calculate water consumption while showering, you need to know the flow rate of your shower head. If you don't know the flow rate of your shower head, you can easily determine it yourself. All you need is a container with a known volume and a stopwatch.

For example, hold a 10-liter bucket under the fully open shower head and time how long it takes to fill it completely. If the shower head takes 50 seconds to do this, it uses 12 liters per minute. This is because water consumption per minute can be calculated as follows:

Formula: 10 liters ÷ 50 seconds × 60 = 12 liters per minute

A person behind a glass pane covered with water droplets

2. Determine your personal water usage per shower

If you then multiply the flow rate of the showerhead by your average shower duration, you'll know how much water you use per shower.

Formula: Shower duration in minutes × flow rate in liters per minute = water consumption per shower

So if you take a 5-minute shower, you'll use about 60 liters per shower. If, on the other hand, you take a 10-minute shower, you'll use 120 liters per shower.

Conclusion: If you know how much water you use when showering, you can manage your consumption more consciously. Even small adjustments to shower duration and water flow rate can help you use less water while showering.