
DuraLAB – Welcome to the lab!
Flushing tests
In flushing tests, we test our products under conditions that are as close to real-life use as possible. To do this, we place liquid or solid test substances in the ceramic basins, which must be completely flushed out. To ensure high quality, Duravit has developed its own flushing tests that go far beyond legal requirements.
By the way: All test materials, whether solid or liquid, are collected in special tanks and either reused or disposed of properly—they do not end up in wastewater. The environment thanks you.
Water-replacement test
The water-replacement test is designed to show how effectively the water is replaced during the flushing process. This is tested using 30 ml of test liquid. If 99 percent of the colored water is replaced during the subsequent flush, this indicates that the toilet has been flushed effectively and hygienically.
Durability tests
Durability is a key priority for us in product development—and that doesn’t just apply to timeless design. That’s why we routinely conduct research and long-term testing on the functionality of our products and the durability of the materials we use. Only in this way can we provide warranties for products that meet our standards and the needs of our customers.
The functions, mechanics, and materials of our products are tested up to 200,000 times in our laboratories. The products must withstand these long-term tests without any adverse effects.
Endurance test of the dryer function on SensoWash® toilets
All functions of the SensoWash toilet undergo long-term testing. In up to 50,000 test cycles, the system is tested to ensure that the dryer temperature, the air volume, and the temperature of the heated toilet seat remain constant for one minute.
Noise tests
Duravit toilets and SensoWash® should be as quiet as possible. That’s why we subject them to noise level measurements in our acoustic laboratories. For example, we test the noise generated during flushing—important tests that are becoming increasingly significant to us as we help create healthy and livable homes.
Noise test during the rinsing cycle
The noise level generated during a rinse cycle—and, in the case of SensoWash®, also during the shower function—is measured in a fully soundproofed room using a highly sensitive measuring device positioned at five locations one meter away.
